Car Key Solutions

* Need 2 original working keys

1. Insert 1st working key into ignition switch and turn ignition switch ON. Wait 3-10 seconds then switch ignition to OFF.

2. Remove 1st key and within 10 seconds insert 2nd working key. Turn ignition switch ON. Wait 3-10 seconds then switch ignition to OFF. Remove 2nd working key from ignition switch.

3. Within 20 seconds, insert new key to be programmed. Turn ignition switch to ON. Wait 6 seconds. Turn Ignition OFF. Check operation of programmed remote. Start engine.

4. If engine doesn't start and warning lamp flashes. Turn ignition switch to ON, wait 20 seconds, turn ignition switch to OFF and repeat procedure.