Car Key Solutions

* Need 2 original working keys to add new keys.

1. Insert 1st working key into ignition switch and turn ignition switch ON. Wait 3-10 seconds then switch ignition to OFF.

2. Remove 1st key and within 5 seconds insert 2nd working key. Turn ignition switch ON. Wait 3-10 seconds then switch ignition to OFF. Remove 2nd working key from ignition switch.

3. Within 10 seconds, insert new key to be programmed. Turn ignition switch to ON. Wait 3-10 seconds. Start engine.

4. If engine doesn't start and warning lamp flashes. Turn ignition switch to ON, wait 30 seconds, turn ignition switch to OFF and repeat procedure.

Upto 8 keys can be programmed.